Description
Application Universal cutter for cutting soft and hard wires and cables
due to contact seal Speed capability Good Good Limited by contact seals Grease-sealing effectiveness Good Better than ZZ type Slightly better than VV type Dust resistance Good Better than ZZ type (usable in moderately dusty environments) Best (usable even in very dusty environments) Water resistance Not suitable Not suitable Good (usable even if fluid is splashed on bearing) Operating temperature –10 to +110 °C –10 to +110 °C –10 to +110 °C Note (1) The above temperature range applies to standard bearings
No-load rotation speed (rpm): 28000
handle-protection sleeve
NSK Deep Groove Ball Bearings 6816 ,Single-Row D=80 Impact Socket Set Long Application Universal cutter for cuttingNSK Deep Groove Ball Bearings 6816 ,Single Row D=80 Bearing Numbers Boundary Dimensions (mm) Basic Load Ratings (kN) Limiting Speeds (min 1) Factor f0 Mass (kg) approx. d D B r min. Cr C0r Grease Oil 6816 80 100 10 0. 6 12. 7 14. 5 6000 7100 17. 4 0. 151 DESIGN, TYPES, AND FEATURES SINGLE ROW DEEP GROOVE BALL BEARINGS Single row deep groove ball bearings are classified into the types shown below. The proper amount of good quality grease is packed in